dirna Bergstrom Bycool Green Série Instructions De Montage page 15

COMPACT 1.4
Position the unit on the hatch gap, introducing
5
the guides in the boreholes (*) of the cabin.
5
Introduce the mounts on M8 studs, underneath
6
the upholstery, secure with (4) Ø8 flat washers
and (4) 8/125 self-locking nuts, positioning
them in the grooves of the mounts and
tightening until they come up against the base
hexagons.
Caution: It is very important to remove the
hatch wiring clamps to ensure the wiring is not
crushed by the mounts.
6
5
5
6
15
EN
®