Troubleshooting; Spare Parts; Ordering Spare Parts; Recycling - Nederman HVCP 45kW EX Manuel De L'utilisateur

EN
Nr Type
W494 Warning
W497 Warning
W500 Warning
W501 Warning
W502 Warning
W503 Warning
W510 Warning
W513 Warning
W514 Warning
W515 Warning
W516 Warning
W545 Warning
5 Troubleshooting
See Table 4.1. If there is an alarm or warning in the
control panel, the first step is to make sure that the
system has been properly configured and that the in-
stallation settings made in the sections above are cor-
rect.
If this does not solve the problem, see the service and
troubleshooting guide for the specific component that
has caused the alarm or warning.
6 Spare Parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Contact your nearest authorized distribut-
or or Nederman for advice on technical ser-
20
HV Control Panel
Warning text
Rotary valve 3 no rotation
Control Filter 4 high dP
Filter 4 TVFD upper not opening
Filter 4 TVFD upper not closing
Filter 4 TVFD lower not opening
Filter 4 TVFD lower not closing
Rotary valve 4 no rotation
ASC1 not opening
ASC1 not closing or duct system leakage
ASC2 not opening
ASC2 not closing or duct system leakage
RBU1 Time for service
vice or if you require help with spare parts. See
also www.nederman.com.
6.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part
(see www.nederman.com).
• Quantity of the parts required.
7 Recycling
The product has been designed for component mater-
ials to be recycled. Its different material types must be
handled according to relevant local regulations. Con-
tact the distributor or Nederman if uncertainties arise
when scrapping the product at the end of its service
life.
Stand- EX
ard
X
X
X
X
X
X
X
X X
X X
EX45-55
EX45-55
X X