Installation Instructions - Danby DDR2510E Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LOCATION
• Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of
extension cords). If it is absolutely necessary to use an extension cord, use an approved "air conditioner"
heavy duty extension cord ONLY (available at most local hardware stores).
• Make sure there are no obstructions restricting airflow through the front air intake grill. Maintain a minimum
clearance of at least 20 cm (8") between adjacent walls and the back of the unit, to allow for proper air
circulation and maximum efficiency. To obtain maximum operating efficiency from your dehumidifier, the
recommended (room ambient) operating temperatures should be between 5°C (41°F)- 35°C (95°F).
• It is important to remember the efficiency of a dehumidifier will be effected/influenced by the rate at which
new humid air (moisture) is allowed to infiltrate the same space/area. To maintain efficiency, the
dehumidifier must be operated in an enclosed area. Keep all doors and windows closed.
• Soft touch (Electronic)Control Key Pads
• Auto-Sensing Humidity Control
• Adjustable Humidity Settings (35% - 80%)
• 2 Fan Speed Settings (High / Low)
• Delay Start Protection (Compressor)
• Auto-Defrost (De-Icer)
Control Panel

INSTALLATION INSTRUCTIONS

FEATURES
Front Panel
Air Inlet
Water level
Indicator
• Full Bucket Indicator Light
• Easy Roll Castors (4)
• Front Mounted Water Tank(Removable)
• Direct Drain Option (Hosenot Included)
• Quiet Operation
• Removable Air Filter
Handle
Air Filter
(Side Panel)
Water Tank
Easy-roll Castors
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ddr3010eDdr4010e

Table des Matières