Features; Installation Instructions - Danby DDR050BECCDB Guide D'utilisation Et D'entretien

Installation Instructions

LOCATION
• Select a suitable location, making sure you have easy access to an electrical outlet
• Make sure there are no obstructions restricting airfl ow through the front air intake grill. Maintain a
minimum clearance of at least 20 cm (8") between adjacent walls and the back of the unit, to allow
for proper air circulation and maximum effi ciency. To achieve maximum operating effi ciency from
your dehumidifi er, the recommended (room ambient) operating temperatures should be between
5°C (41°F) and 35°C (95°F).
• To maintain effi ciency, the dehumidifi er must be operated in an enclosed area. Keep all doors and
windows closed.
• Do not use this unit outdoors. This dehumidifer is intended for indoor residential applications only.
This dehumidifi er should not be used for commercial or industrial applications.
• Place the dehumidifi er on a smooth, level fl oor strong enough to support the unit with a full bucket
of water.
• Place the unit where it has access to an electrical outlet.
• This unit has 4 castors which can move freely. Do not force castors to move over carpet, and re-
frain from moving the unit with water in the bucket (the unit may tip over and spill water).
• Protect wood fl oors from possible spillage or scratches when moving unit.
• Remove accessories and store them in a safe place.

FEATURES

• Soft touch (Electronic) Control Key Pads
• Auto-Sensing Humidity Control
• Adjustable Humidity Settings (35% - 85%)
• 2 Fan Speed Settings (Turbo/Normal)
• Delay Start Protection (Compressor)
• Auto-Defrost (De-Icer)
• Full Bucket Indicator Light
• Easy Roll Castors (4)
• Front Mounted Water Tank (Removable)
• Direct Drain Option (Hose not included)
• Quiet Operation
• Removable Air Filter
4