Ayce CDM08F Traduction De La Notice Originale page 51

MAINTENANCE
CAUTION!
Always disconnect the device before performing any adjustment or maintenance
operation. If the power cable is damaged, it must be replaced by the manufacturer
or its service agent in order to avoid any hazard.
Disconnect the power cable from the mains if the cable is damaged in any way.
Take care not to expose this tool to rain or any water.
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastic parts are
susceptible to damage from various types of commercial solvents and may be
damaged by their use.
Use clean cloths to remove any dirt, carbon dust, etc.
STORING
Store the machine, its operating instructions and any accessories in their original
packaging. In this way, you will always have all the information and parts ready to
hand. Pack the device well or use the original packaging in order to avoid transit
damage. Always keep the machine in dry place.
DISPOSAL
Do not dispose of power tools in household waste! Under European
Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE) and its transposition into national law, power tools that are
no longer usable must be collected separately and disposed of in an
environmentally correct manner.
GB
100| 101
6/2017