Description Of The Symbols - Ayce CDM08F Traduction De La Notice Originale

20. Do not force the router. Your router will do a better job if you move it slowly.
21. Avoid cutting nails and screws. Inspect timber and remove all nails and
screws before cutting.
22. In the event of an electrical or mechanical malfunction, immediately switch
off the saw and disconnect the power cable from the mains supply.
Additional Instructions
The permissible rotational speed of the router tool must be at least as high as the
maximum speed indicated on the electrical power tool. Parts used at higher than
permissible speeds may be damaged.
The router or other parts must fit exactly into the collet (shaft diameter 6/8) of
your electric power tool. Cutting tools, which do not fit correctly into the collet of
the electric power tool, will turn unevenly, vibrate strongly and may result in a loss
of control. Always switch on the electrical power tool before placing it against the
workpiece. There is also the risk of kickback if the electric power tool becomes
caught in the workpiece. Keep your hands well away from the cutting area and the
router.
Keep your second hand on the additional handle or on the engine housing. If you
hold the router with both hands, they cannot be injured by the router. Never use on
metal objects or workpieces with nails or screws. The router may become
damaged and this may result in increased vibrations.
Use suitable detectors in order to look for hidden wiring or pipes, or consult your
local utility services. Contact with electric wiring can cause fire and electric
shocks. Damage to a gas line may lead to explosions. Breaking a water line can
cause damage.

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible
risks. The safety symbols and the explanations that accompany them must be
perfectly understood. The warnings in themselves do not remove the risks and
cannot replace correct actions for preventing accidents.
This symbol indicates a risk of danger and
that caution is required. Ignoring this
warning may result in an accident to yourself
or others. To limit the risks of injury, fire or
electrocution,
recommendations indicated..
WARNING – To reduce the risk of injury, the
user must read instruction manual
Before any use, refer to the corresponding
section in this user manual.
WARNING
protection, ear protection and a dust mask
when using the product.
Complies with relevant EU regulations.
GB
88| 89
always follow the
Always wear gloves, eye
6/2017