Operating Principle; Environmental Safety - ARDES AR1F62I Mode D'emploi

This product has been manufactured in conformity with current
2006/95/EC and 2004/108/EC.
Technical data indicated on the appliance.

OPERATING PRINCIPLE

The appliance works by generating short-range magnetic fields.
When the high-frequency current runs through the coil to excite the magnetic field,
the magnetic line of force penetrates the molecules of the steel pan to create an
infinite number of small vortices that generate heat.

ENVIRONMENTAL SAFETY

The cooker automatically enters a protective state if the pan overheats or there is a
problem with the power supply.
Similarly, the hob will turn off if it has not received any instruction for two hours.
As opposed to gas or other conventional cookers, the induction cooker cooks
without producing a visible flame or smoke, thus reducing the possibility of danger
or accidents normally associated with the use of other heating methods and the
reason why using the induction hob is more environmentally friendly.
TYPES OF PANS TO USE
Any pan with a flat bottom, a diameter between 12 and 26 cm, and made of a
metal with magnetic properties such as cast iron, iron or steel may be used
on the cooker plate to cook or heat food. Make sure that the pan contains the
symbol below:
Containers that cannot be used to heat food include those made of aluminum
or copper or aluminum, and with a diameter of less than 12 cm.
USE OF THE APPLIANCE.
Insert the plug into the power socket, place the pot in the centre of the hob, and
press the ON-OFF button. If the pot is not in place, the appliance will not run.
The appliance bleeps when switched on. If the appliance does not receive any
instructions for 30 seconds, it will turn off automatically.
The control panel is "TOUCH", since the functions can be activated simply by
touching the buttons, without applying pressure.
To use the stove, press the "SELECT" button and the POWER light will come on:
the display will show a preset value of 1200W; you can now set the desired power
by using the +/- buttons, from a minimum of 200W to a maximum of 2000W along
with intermediate power values (400, 600, 800 W etc.), or alternatively, use the MIN
or MAX button to go straight to the maximum or minimum power.
If the "SELECT" button is pressed again, the TIMER light will come on: the display
will show 0; you can now set the time in which the appliance will turn off by using the
+/- buttons, from a minimum of 5 min. to a maximum of 180 min. with time values
in increments of 5 minutes.
INSTRUcTIONS fOR USE
7