Attaching And Detaching The Transmitter; Turning On The Power - Canon Speedlite ST-E3-RT Mode D'emploi

Attaching and Detaching the Transmitter

Before attaching or detaching the transmitter, be sure to turn the transmitter
power off.

Turning on the Power

1 Attach the transmitter.
Slip the transmitter's mounting foot
all the way into the camera's hot
shoe.
2
Secure the transmitter.
On the mounting foot, slide the lock
lever to the right.
When the lock lever clicks in place, it
will be locked.
3 Detach the transmitter.
While pressing the lock-release
button, slide the lock lever to the left
and detach the transmitter.
Set the power switch to <K>.
The LCD panel illuminates.
The charge lamp lights when the
wireless shooting (slave) is ready.
During wireless shooting, press the
transmitter's charge lamp (test flash
button) to fire a test flash.
13