LENCO KCR-200 Mode D'emploi page 8

To replace a new battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper direction.
Push in according to this direction
•
If the remote control conflicts with other devices, the operation will be affected.
•
Do not simultaneously press buttons on the unit and the remote control.
•
Avoid using two remote controls at the same time as it will cause a malfunction.
•
Use only CR-2025 size batteries.
•
If there is battery leakage, clean the remote control thoroughly before replacing batteries.
•
Do not short two terminals of the batteries. Dispose old batteries in a suitable place.
Battery case
8
Pull out the battery case
CR2025 battery