Sony DSX-A310DAB Mode D'emploi page 8

Searching for station by station name
Before operation, set [SEEK BY] to [A-Z] for
searching by station name (page 13).
1
Press MODE to select [DB1], [DB2] or
[DB3].
2
Press / (SEEK –/+) to switch to
the previous/next station.
Searching for a station by name
(Quick-BrowZer™)
You can display a list of stations for easy searching.
1
During DAB reception, press
The unit enters Quick-BrowZer mode, and the
list of stations appears.
2
Rotate the control dial to select the
desired station, then press it.
Reception starts.
To exit the Quick-BrowZer mode
Press (back).
Updating the station list (Auto tune)
1
Press MODE to select [DB1], [DB2] or
[DB3].
2
Press MENU, rotate the control dial to
select [GENERAL], then press it.
3
Rotate the control dial to select [SET
AUTOTUNE], then press it.
The unit updates the list of stations.
Storing a station manually
1
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
8
GB
Receiving stored stations
1
After selecting the desired band, press a
number button (1 to 6).
Setting DAB announcements
If you enable DAB announcements, DAB
announcements can interrupt the currently
selected source.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select [SET
ANNOUNCE], then press it.
(browse).
3
Rotate the control dial to select [SET
ANNC-ON] or [SET ANNC-OFF], then press
it.
Note
During a DAB announcement, the volume is adjusted to
the level set for TA in RDS (page 9).
To listen to the same or similar program
even during weak reception
Set [SET SOFTLINK] to [ON] (page 14).
[FM-LINK] lights up when the corresponding FM
program is being received.
"Hard Link" follows the same program, and "Soft
Link" follows a similar program.
SOFT
LINK
OFF
ON
DAB
Hard Soft Hard
Link Link Link
 
  
FM
Soft
Link
