Domo MS171 Mode D'emploi page 31

www.domo-elektro.be MS171
DISMANTLING FOLDABLE TRAY
Fold the tray 45° and press the bottom of the tray towards the
middle as indicated on the drawing and remove the tray from its
fixture.
DISMANTLING SUPPORT PLATFORM
Turn the knob for adjusting thickness (4) counterclockwise so that
the support platform (9) is released from the machine's casing.
DISMANTLING BLADE
Turn the screw for fastening the blade (10) clockwise. Adjust the
support platform to the thickest setting so that it is easier to remove
the blade. The blade and the machine casing can be cleaned with a
disposable damp cloth.
Take great care: The blade is razor sharp! Always hold onto it by
the screw used for fastening it.
USE
Pull the food carriage (7) that is attached to the
foldable tray (12) away from the cutting edge of the
blade.
Place the food on the food carriage (7) and push it
against the support platform (9) with the food pusher
(5).
Press the safety button (8) and hold it in.
Press the on/off switch (1) to start the machine so that
the blade starts rotating.
Keep the on/off switch (1) pressed in for as long as
you wish to continue slicing. You can release the
safety button (8) when you press in the on/off switch (1).
Slide the food carriage (7) backwards and forwards along the rotating blade (11) on
the foldable tray (12).
Release the on/off switch (1) when you are finished.
CAUTION
You must always use the food pusher when slicing food that is smaller than 15 cm x
15 cm. For larger pieces you can remove the food pusher. If you remove the protection
take extra care!
Hold your fingers well away from the rotating blade.
Never use the machine for longer than 6 minutes in any one session.
31