Domo DO9042P Mode D'emploi page 22

DO9042P
PARTS
3
1. Power indication light (red)
2. Temperature indication light (green)
3. Non-stick cooking plate
1
4. On/off switch
5. Temperature selection
2
6. Cord storage
6
5
USE
4
Before first use, remove all packaging material and stickers from the unit and wipe the
cooking plate with a damp cloth, then dry thoroughly.
Insert the plug into a power outlet,
Press the on/off button to turn on the unit. The power indication light will illuminate.
Select the desired temperature. When the plate reaches the desired temperature the
green temperature indication light will illuminate.
When cooking crêpes, preheat cooking plate on temperature setting 2 then pour a
small amount of batter onto the centre of the cooking plate. Quickly spread the batter
in circular movements using the batter spreader until desired diameter of the crêpe is
achieved.
Allow the crêpe to cook until the top surface is no longer runny and the crêpe can be
moved slightly on the cooking plate.
Insert the spatula under the crêpe and turn the crêpe over to cook the other side.
Cook crêpe until just golden.
Remove the crêpe from the cooking plate using the spatula. If the last crêpe cooked
was too dark, adjust the temperature selection before making your next crêpe.
At the end of cooking, switch off the unit by pressing the on/off button. Remove the
plug from he socket. Allow the appliance to cool then clean before storing.
CARE AND CLEANING
Always clean the appliance after every use. Make sure the unit is switched off and
unplugged. Let the unit cool completely.
Wipe the baking plate with a damp cloth. When baked-on foods cannot be removed by
this method, brush with a little oil. Allow to stand for 5 min, wipe with a damp cloth
and then dry thoroughly. Dry the appliance thoroughly before storing.
STORING
Wrap the cord around the cord storage under the base and stand upright on the feet
under the base. Do not store anything on top.