Technical Specifications - Vermeiren Illico Manuel D'utilisation

6

Technical specifications

The technical details below are only valid for this nursing bed, at standard settings and optimal
ambient conditions. Take these details into account during use.
The values are no longer applicable if your nursing bed has been modified, damaged or suffers
from severe wear.
Table 1: Technical specifications
Brand
Address
Type
Model
Description
Max. weight of user
Length
Height
Width
Height of mattress support, adjustable
Total mass
Total mass of heaviest part
Max. angel head section, adjustable
Max. angle for upper leg
Max. angle for lower leg
Max. safe working load
Nominal load of lifting pole
Mattress specifications
Clearance below bed for patient hoist
Castor wheels (4 pieces)
Motor of undercarriage
Motor of head section
Motor of knee-bend system (optional)
Handset
Transformer
Nominal voltage, transformer
Period switched on
Noise level
Class / Kind of protection
Vermeiren
Vermeirenplein 1/15, B-2920 Kalmthout, Belgium
Nursing bed
Illico
Dimensions
2080 mm
783 mm - 1313 mm
1024 mm
Continuously from 298 to 828 mm (without mattress)
85 kg (excl. side rails, lifting pole and triangle)
Min. RG 35, thickness 120 mm, 2000 x 900 mm,
max. 20 kg
Ø 100 mm, all wheels with brake
Linak LA40, IPX6
Linak LA27, IPX6
Linak LA27, IPX6
Linak HL7X045-01, IPX4
Linak CA40, IPX6
U : 100 - 240 V AC, 50/60 Hz
in
I : max. 2.5 A
in
10%, Maximum 2 minutes then 18 minutes for non-use
~ 48 dB(A)
Protection class II, application part Type B / IPX4
EN - 13
Technical specifications
140 kg
31 kg
70°
36,8°
-17,2°
170 kg
75 kg
150 mm
EN
Illico
2018-07
NL