Publicité
Les langues disponibles
Les langues disponibles
• 1 active 8"/10˝/12˝/15˝ woofer
2.5˝/3.0˝/3.0˝ coil.
• 1 passive
(2)
8"/10˝/12˝/15˝ woofer with very long throw and additional mass.
• 2 line input
• 2 line output
• 2 speaker input
• Electronic limiter
• Phase adjustment 0° or 180°
• Active crossover with variable cut off and 24dB/Oct slope
• 19 to 25mm' MDF cabinet
Dimension
Weight
Frequency
range
Power
1
Driver with a diaphragm moved by an electromagnetic motor. The movement is
proportional to the electric signal generated by the amplifier.
2
Driver with a diaphragm coupled with an additional mass but without motor. The movement
is created by the acoustic coupling of the passive and active drivers.
3
Device allowing a progressive limitation of the amplifier's maximum level of output power to
avoid any acoustic saturation.
4
The cut off slope of a crossover shows the level of attenuation of the frequencies located
beyond cut off. 24dB per octave means that if the cut off frequency is 80Hz, the 160Hz
frequency will have an attenuation of 24dB.
T
ECHNICAL
(1)
with very long throw coil, 7˝ double magnet and
(3)
TITAN 5.4
25 x 30 x 25 cm
16 Kg
30 to 200 Hz
200/400 W
I
NFORMATION
TITAN 7.4
32 x 36 x 32 cm
20 Kg
26 to 180 Hz
200/400 W
(4)
.
TITAN 11.4
36 x 40 x 36 cm
25 Kg
20 to 140 Hz
200/400 W
TITAN 15.4
42 x 46 x 42 cm
30 Kg
16 to 100 Hz
200/400 W
Publicité
