Publicité
Les langues disponibles
Les langues disponibles
• Setting the phase
After having found the best position for the subwoofer in your room, you can set the phase. The
switch (D) can be put in 2 positions:
0°: The subwoofer is in phase with the electric signal coming from the amplifier.
180°: The subwoofer is in phase opposition.
The optimum setting of the phase is subjective. The switch should be set on the position where
the subwoofer delivers the most bass.
U
SING THE SUBWOOFER
Caution: Make sure that the volume control is set to zero when connecting the subwoofer.
After connecting to AC outlet, press the power switch (A) « ON ». After a few seconds, the led
turns green. The power switch (A) puts the subwoofer on an automatic configuration : the
subwoofer is put on hold after it has been inactive for 5minutes (cutting the internal power
circuit).
Note: If the subwoofer turns itself off during a movie playing, turn down the sound level on the
subwoofer and compensate by turning up the subwoofer sound level on the AV amplifier.
B
C
D E F
A
Publicité
