Technical Data - Hilti DD-REC 1 Mode D'emploi

Technical data

Nominal power input:
Nominal voltage: ✱
Mains frequency:
Weight of unit (without water):
Water volume:
Max. number of holes per filling: ✱✱
Dimensions (without wheels):
Max. water pressure:
Permissible operating temperature range:
Permissible storage or transport temperature range:
✱✱ The unit is offered in different versions for various mains voltages. Please refer to the information on the
type plate for the nominal voltage and nominal current input of your unit.
✱✱ Measured at 20 mm dia. and 125 mm drilling depth; depends on base material, drilling direction and type
of hole drilled (through hole, blind hole)
Noise information (in accordance with EN 61029)
Typical A-weighted emission sound pressure level (L
Main features of the unit
– Class I electrical protection
– Extraction of drilling slurry
– Water is retrieved from the drilling slurry (recycling)
– Supplies water and power for the DD EC-1 diamond core drilling machine
– Integrated supply and return hose set for connecting the DD EC-1 diamond core drilling machine
– Automatic filter flushing
– Filter can be regenerated
- Stand-by operation
– Warning indicators for:
– inadequate water flow
– overheating
– Self-check of the electronics carried out each time the unit is switched on
– Removable container for water and drilling slurry
– Removable wheel assembly, also provides suitable surface for laying down the toolbox for the diamond core
drilling machine
Right of technical changes reserved
12
Printed: 06.11.2015 | Doc-Nr: PUB / 5139941 / 000 / 01
300 W
100 V 110 V 120 V
50–60 Hz
25 kg
4–13 l
Approx. 50
500×330×420 mm
6 bar
+ 3 ... +50°C
–15 ... +50°C (without water, remove the filter)
): 76 dB (A) ≤ 80 dB (A
pA
220 V 230 V 240 V