General Information - Hilti DD-REC 1 Mode D'emploi

DD-REC1 water recycling system
It is essential that the operating
instructions are read before the
unit is used for the first time.
Always keep these operating
instructions together with the unit.
Ensure that the operating instruc-
tions are with the unit when it is
given to other persons.
Operating controls
ON / OFF switch
ON indicator lamp
Water warning lamp
Temperature warning lamp
Keyed plug connection for electric cable
(supply cord socket)
Water level / slurry volume sight glass
Trolley release lever
Trolley handle lock
Container grip
Housing grip
Air release valve
Container cover latch
Main filter
Extraction hose coupling
Water supply hose coupling
Keyed plug connection for electric cable
(Plug for drilling machine)
Contents

General information

Description
Technical data
Accessories
Safety precautions
Before use
Operation
Care and maintenance
Manufacturer's warranty - tools
Disposal
Troubleshooting
Declaration of conformity (original)
Printed: 06.11.2015 | Doc-Nr: PUB / 5139941 / 000 / 01
General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid a risk of serious injury.
Caution: High voltage
The numbers refer to the illustrations on the fold-out
cover pages (front and rear cover).
/ The numbers refer to the operating controls /
component parts of the unit.
In these operating instructions, the electric appliance to
which these operating instructions apply is referred to
as "the unit".
Component parts
Housing
Container
Cover
Wheel assembly / Trolley
Nipple
Hose set
Pocket for documents about the unit
Float
Sedimentation tube
Type plate
Description
The DD-REC1 is an electrically powered water recycling
Page unit for use with the DD EC-1 diamond core drilling
machine.
11
11
Items supplied: recycling unit, wheel assembly, oper-
12
ating instructions, cleaning pad
13
13
The following conditions must always be observed
14
when the unit is in use:
- The unit must be connected to an alternating current
14
electric mains supply in compliance with the infor-
17
mation given on the type plate.
17
- The unit may be used only with the supply cord for
18
the DD EC-1 diamond drilling machine.
19
- The unit must not be operated in areas where there
20
is a risk of explosion.
11