Cleaning And Maintenance - Fust NOVAMATIC TW740E Notice D'utilisation

The child lock cannot be deactivated in the
last phase of the drying cycle.
Changing programme
To change a programme which is running,
first cancel it by turning the programme se-
lector dial to . Select the new pro-
gramme and press the START/PAUSE but-
ton.
The programme can no longer be
changed directly once the programme
has started. If nevertheless there is an
attempt to change the programme on
the programme knob, the programme
progress display and the maintenance
indicators flash. If an option button (ex-
cluding the Signal (Buzzer) button) is
pressed,
The drying programme is not however
affected by this (laundry protection).
Drying cycle complete / removing
laundry
Once the drying cycle is complete, the dis-
play shows the
flashing as well as warning lamps: Sieb (Fil-
ter) and Behälter (Water Reservoir) . If the
Signal (Buzzer) button has been pressed,

CLEANING AND MAINTENANCE

Emptying the water reservoir
Empty the water reservoir after every drying
cycle.
Caution! The condensed water is not
suitable for drinking or for preparing
foodstuffs.
If the programme has been interrupted
as a result of the water reservoir being
appears on the display.
anti-crease icon and
an acoustic signal sounds intermittently for
about one minute.
The drying cycles are automatically fol-
lowed by an anti-crease phase which
lasts around 30 minutes. The drum ro-
tates at intervals during this phase. This
keeps the laundry loose and free of
creases. The laundry can be removed
at any time during the anti-crease
phase. (The laundry should be taken
out towards the end of the anti-crease
phase at the latest to prevent creases
from forming.)
1. Open door.
2. Before removing the laundry, remove
fluff from the micro-fine filter. It is best
to use a damp hand for this purpose.
(See "Cleaning and maintenance"
chapter.)
3. Remove laundry.
4. Turn the programme selector to
5. Close the door.
After each use
• Clean the filters.
• Empty the water reservoir.
full: Press the START/PAUSE button to
continue the drying cycle.
Cleaning fluff filters
The filters collect all the fluff which accumu-
lates during drying. To ensure that the dryer
works perfectly, the fluff filters (micro-fine fil-
ter and fine strainer) must be cleaned after
every drying cycle.
51
off.