EN
☞
Make sure that the power cord is not laying on the floor in
order to prevent someone from inadvertently overturning
and pulling the unit.
•
Never insert materials other than ice cubes into the funnel
intake of the ice crusher.
Do not use "Cylindrical" (Spanish) ice cubes.
•
Do not run the ice crusher dry, i.e., without ice.
•
Never operate the ice crusher without having assembled it
correctly.
•
Never leave the ice crusher unattended while it is operating.
•
Before using the ice crusher for the first time, or after a long
period in which it has not been used, carefully wash the funnel
(2) and the crushed ice container (6) with hot water and dish
washing detergent, rinse thoroughly and dry carefully.
☞
During operation, the power outlet should be easily ac-
cessible in the event that it is necessary to disconnect the
equipment.
•
Do not tamper with the ice crusher in any manner or for any
reason.
In the event of malfunction contact your reseller.
•
To avoid useless and hazardous overheating of the ice crusher,
DO NOT leave the device uselessly connected to the electrical
power source. Disconnect the electrical power cord from the
wall outlet when the ice crusher is not being used.
•
Unwind the electrical power cord completely when the ice
crusher is being used.
•
Inspect and verify the state of wear of the electrical power
cord. Its eventual substitution must be performed by
specialised personnel.
•
If the unit is to be disposed of, render it unusable by cutting
the electrical power cord after having disconnected it from
the electrical power outlet.
For domestic use only.
20