2 Safety Notes
•
This appliance corresponds to the EC Directive No.
89/336/EWG for electromagnetic compatibility.
•
This unit is suitable for audio signals up to 5 V only.
•
Protect the unit against humidity, heat and contamination.
•
For cleaning use a dry dust cloth only, by no means
chemicals or water.
•
If the unit is used for purposes other than originally in-
tended, if it is operated in the wrong way or not repaired by
authorized skilled personnel, there is no liability for pos-
sible damage.
3 Applications
1. DC isolation between a signal source (e. g. instrument,
microphone, computer, etc.) and the following unit (e. g.
amplifier, mixer, effect unit, etc.).
2. Reduction of interferences (e. g. humming) in long signal
lines by reducing the output impedance of the signal
source.
3. Reduction of interferences in long signal lines via balanced
signal transmission.
4. No hum loops when separating the ground between input
and output.
5. With wrong phase of the signal, the phase will be changed
by 180°.
6. Change from XLR to
7. Change from balanced to unbalanced and vice versa.
1
/
" jack and vice versa.
4
GB
9