Switching The Drum Set - Edirol studio Canvas SD-90 Manuel De L'installateur

I Switching the drum set
In the same way as for instruments, you can switch drum sets by transmitting MIDI messages from
sequencer software running on your computer.
The drum set will switch when the program change is received. Transmit the program change message on
the same channel as the MIDI receive channel of the drum part. On the SD-90, the drum set number
corresponds to the program number.
How to read the drum set list
In normal screens, the drum set number and drum set name will be displayed. Drum sounds (drum
instruments) are assigned to each key of the drum set.
The types of drum set built into the SD-90 are listed by number and name in the drum set list for each
sound generator mode. The type of sound included in the drum set is also listed by number and name.
fig.4-10j
PC001
Standard Set
27
High Q
28
Slap
Scratch Push
29
30 Scratch Pull
Sticks
31
32
Square Click
33
Metron Click
34
Metron Bell
35
Kick Drum 2
Switching drum sets in GM2 mode
Transmit bank select LSB (CC#32) and program change (PC#).
* Bank select MSB (CC#00) is used to switch the part mode. Inst part and Drum part correspond to the following
numbers.
Inst part
121(79H)
<Example> Specifying part 10 as a GM2 drum part (009:Room Set 2)
•""Drum set list (GM2 / Native mode)" (p. 140)
•""Drum set list (XGlite mode)" (p. 152)
•""Drum set list (GS mode)" (p. 149)
PC009
Room Set
High Q
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metron Click
Metron Bell
Kick Drum 2
PC Drum set number (program number)
Keyboard area Note number
<- Same sound as percussion instrument sound of Standard Set 1 (PC001)
— Note number for which no percussion instrument exists
Drum part
120(78H)
MIDI CH= 10
CC#00 120
CC#32 0
PC# 9
PC017 PC025
Power Set Erectric Set
High Q High Q
Slap Slap
Scratch Push Scratch Push
Scratch Pull Scratch Pull
Sticks Sticks
Square Click Square Click
Metron Click Metron Click
Metron Bell Metron Bell
Power Kick 2 Elec.Kick 2
... set as a GM2 drum part
... specify variation number 000
... specify program change number 009
Controlling the SD-90 via MIDI
PC026
Analog Set
High Q
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metron Click
Metron Bell
Ana.Kick 2
87