10 PART Buttons
Use these buttons to switch the part display.
If you press [
] and [
(p. 30)).
11 EXIT Button
Use this button to cancel an operation, or to return to the previous screen or the basic screen.
12 ENTER Button
Use this button to execute an operation or to select a screen.
13 PREVIEW Button
Use this button to audition the currently selected sound (instrument) ("Ecoute des sons (aperçu)" (p. 15).
14 SHIFT Button
This button is used in conjunction with other buttons to change the function of the other button.
fig.1-01a
15 POWER Switch
This turns the power of the SD-90 on/off. The power is on when the
switch is pressed in, and the power is off when the switch is in the
outward position. When the power is on, the white backlighting of
the LCD screen will also be on.
16 MIC/GUITAR Jack
A dynamic microphone or a guitar can be connected here ("Connexion d'une micro ou d'une guitare"
(p. 50)).
* This jack is not compatible with the miniature microphones (condenser mics) included with personal computers
and sound cards.
17 GAIN Knob
Turning this knob will adjust the gain of the signal input from the MIC/GUITAR jack or LINE IN jacks. By
pressing this knob, you can select whether a mic or a guitar is connected to the MIC/GUITAR jack
("Connexion d'une micro ou d'une guitare" (p. 50)).
18 GAIN Indicator
This indicates whether mic or guitar is selected for the MIC/GUITAR jack. Mic is selected when the indicator is
lit, and guitar is selected when the indicator is dark.
19 PEAK Indicator
This indicates the level of the signal that is input to the MIC/GUITAR jack or the LINE IN jacks. The indicator
will light at -3 dB, so use the GAIN knob to adjust the input so that the indicator lights occasionally during the
loudest passages.
20 QUICK ACCESS Knobs
In the basic screen, these knobs adjust the volume levels of the following outputs ("Réglage du volume dans
l'écran principal" (p. 13)).
In the editing screens, the parameters shown in the bottom row of the display are assigned to these knobs, and
can be adjusted by them.
21 VOLUME Knob
This knob adjusts the output level of the audio signal that is output from the rear panel OUTPUT 1 jacks and
from the Headphone jack
22 Headphone Jack
A set of headphones can be connected to this jack. The headphone jack outputs the same signal as the
OUTPUT 1 jacks.
] simultaneously, all parameters will be displayed ("Modification dans une liste"
.
Lower position
Upper position
ON
Introduction
OFF
11