Specification; Maintenance/Calibration - Riester Metpak Mode D'emploi

9. Specification

Operating conditions:
Storage conditions:
Pressurised cuff sleeve: Available for plastic bags of 500 ml
Manometer:
Pressure increase:
Pressure reduction:

10. Maintenance/calibration

The Metpak and its accessories do not require any specific
maintenance.
For calibration remove tube from manometer and hold mano-
meter vertical. When the pointer stops on zero of the scale,
the unit is accurately adjusted. When the pointer is not on zero,
return unit to an authorised RIESTER dealer in your vicinity.
A list of dealers is available on request.
10°C to 40°C subject to a relative
humidity of 85% (non-condensing)
-20°C to 70°C subject to a relative
humidity of 85% (non-condensing)
and 1000 ml
Scale: range 0-300 mm Hg in steps
of 2 mm Hg. No stop pin.
By bulb
By controlled air release valve
11