Calibration Interval; Technical Data - BEHA Unitest 93486 Mode D'emploi

PTDB93486000.qxd
Please consider your environment when you dispose of your
one-way batteries or accumulators. They belong in a rubbish
dump for hazardous waste. In most cases, the batteries can
be returned to their point of sale.
Please, comply with the respective valid regulation regarding the re-
turn, recycling and disposal of used batteries and accumulators.
If an instrument is not used over an extended time period, the ac-
cumulators or batteries must be removed. Should the instrument be
contaminated by leaking battery cells, the instrument has to be re-
turned for cleaning and inspection to the factory.

6.2 Calibration Interval

The instrument has to be periodically calibrated by our service depart-
ment in order to ensure the specified accuracy of measurement results.
We recommend a calibration interval of one year.

7.0 Technical Data

(for 23°C ± 5%, less than 80% rel. humidity)
Display:....................................3
Battery display: ........................"
Overflow display: ....................all digits are flashing
Sampling rate: ........................2 measurement / s
Max. clamp diameter: ..............33 mm (closed current converter) 20 mm
Operation temperature:............0°C...+40°C, for less than
Storage temperature: ..............-10°C...+60°C, for less than
Auto Power Off: ......................approx. 10 min
Height above sea level: ............up to 2000m
Degree of contamination: ........2
Overvoltage class: ..................CATII / 600V, CATIII / 300V
20
24.01.2006
1 /
digit, numerical LCD, max. display
2
3200 digits with symbols for units and di-
scharged battery
-
+
" in display screen requires battery
replacement
(open current converter)
80% rel. humidity
70% rel. humidity
towards ground
15:59 Uhr Seite 20