Product Description; Function - Balluff BNI IOL-727-S51-P012 Notice D'utilisation

BNI IOL-727-S51-P012 / BNI IOL-728-S51-P012
Network interface – Analog hub
4
Product description (continued)
4.2

Function

IO-Link hubs for digital inputs/outputs and analog inputs
(depending on variant) have eight freely configurable ports.
The connection to the higher-level master module is made
via the IO-Link protocol.
Functionally, the hub module is comparable to a passive
distribution box: Recording of digital or analog signals and
forwarding via the IO-Link interface or forwarding of the
digital control signals coming via IO-Link to connected
actuators.
For configuration information, see document
IO-Link configuration at www.balluff.com on the
product page.
Analog ports are marked with
Device variant BNI IOL-727-S51-P012
Mixed hub for digital inputs and outputs and analog input
signals:
– 4 analog input ports (voltage and current) and 4 digital
input and output ports (two channels per port), freely
configurable
– X00...X03: digital I/O functionality,
X04...X07: analog input functionality
– Single-channel monitoring and extended diagnostic
options via IO-Link and status LEDs
Device variant BNI IOL-728-S51-P012
Hub with analog input signals:
– 8 analog input ports X00...X07 (voltage and current),
freely configurable
– Single-channel monitoring and extended diagnostics
option via IO-Link and status LEDs
www.balluff.com
.
english 9