Steba LR 6 Mode D'emploi page 9

Safety instructions when using the device:
∙ Always connect the device to a safety socket
∙ Do not use the device unless it is fully assembled.
∙ Route connecting cable in such a way as to avoid unintentional contact or pulling
during operation.
∙ Unplug device from socket before moving its location.
∙ Disconnect mains plug after use and before cleaning.
Operation
∙ Only use the provided power cable
∙ The connecting socket is in the swivelling stand
∙ Start the device using the on/off button
∙ The electrostatics may generate a little noise when the equipment is first used.
∙ The air speed is adjusted using the
∙ The wavy lines show which setting has been selected (Min = , Max =
∙ Silent mode: By pressing the
illuminated, but the
The electrostatic propulsion creates a little airflow, although the fan is not working.
Another pressing of the
∙ appears when the filter requires cleaning.
∙ appears if the filter is still damp after cleaning and dries within 2 hours.
∙ The blow-out angle can be adjusted by 360 degree rotation.
∙ Switch the device off using the on/off button
.
button.
for the fourth time the ON/OFF button
symbols not.
button is restarting the fan with the lowest speed .
Brush
after use
).
is still
9