Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Working place:
∙
Place this device on a even and stable surface. Do not place the device
near objects that may be sucked in (such as curtains)
∙
Do not place the device directly in front of people or animals.
∙
For your health's sake, please select the correct air speed.
∙
Keep a minimum distance of 30cm from any metal object (e.g. radiators).
Safety instructions when using the device:
∙
Always connect the device to a safety socket
∙
Do not use the device unless it is fully assembled.
∙
Route connecting cable in such a way as to avoid unintentional contact or pulling
during operation.
∙
Unplug device from socket before moving its location.
∙
Disconnect mains plug after use and before cleaning.
Operation
∙
Only use the provided power cable
∙
The connecting socket is in the swivelling stand
∙
Start the device using the on/off button
∙
The electrostatics may generate a little noise when the equipment is first used.
∙
The air speed is adjusted using the
∙
The wavy lines show which setting has been selected (Min =
∙
Silent mode:
illuminated, but the
The electrostatic propulsion creates a little airflow, although the fan is not working.
Another pressing of the
∙
appears when the filter requires cleaning.
∙
appears if the filter is still damp after cleaning and dries within 2 hours.
∙
The blow-out angle can be adjusted by 360 degree rotation.
∙
Switch the device off using the on/off button
Cleaning and maintainance:
∙
Unplug the device.
∙
Never immerse the device in water!
∙
To remove the filter, swivel the outlet opening vertically downwards. The filter can
be lifted out from above using the recessed grips. Carefully brush off the slats using
the provided brush next to the connecting contacts.
∙
The slat part can be rinsed with warm water.
∙
Then dry thoroughly and re-insert.
∙
The intake and outlet grilles can be vacuumed with a vacuum cleaner.
480-13209 - LR6 - 03-2011.indd 7
By pressing the
for the fourth time the ON/OFF button
symbols not.
button is restarting the fan with the lowest speed .
.
button.
after use
, Max =
).
is still
05.04.2011 14:03:58
7
Publicité
Table des Matières
