Additional Safety Warnings For Pressure Washers; Before The First Use; Contents Of Packing; Intended Use - Batavia MAXXPACK BT-NXF001 Mode D'emploi

3. Additional safety warnings for
pressure washers
The liquid must not be directed towards
3.1
equipment containing electrical
components.
Remove or disconnect the battery pack
3.2
after use and before carrying out user
maintenance on the appliance.
The appliance shall not be left unat-
3.3
tended while it is connected to the bat-
tery pack.
The appliance is not to be used if it has
3.4
been dropped, if there are visible signs
of damage or if it is leaking.
Keep the appliance out of reach of chil-
3.5
dren when it is energized cooling down.
Exhausted batteries are to be removed
3.6
from the appliance and safely disposed
of.
If the appliance is to be stored unused
3.7
for a long period, the batteries are
removed.
The supply terminals must not to be
3.8
short-circuited.

4. Before the first use

Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!

5. Contents of packing

1× Cordless pressure cleaner
1× Lance extension
1× Short lance
1× Multi-spray nozzle
1× Soap bottle
1× Hose (5m)
1× Regulator stop
1× Instruction manual

6. Intended use

This tool is intended for cleaning and water-
ing. This battery powered pressure cleaner
should be used for private households only.

7. Assembly

Assembly short lance
7.1
— Attach the multi-spray nozzle to the short
lance.
(See Fig. D).
Slide the ring of the nozzle adaptor (11) of
the short lance (12) backwards.
Snap the multi spray nozzle (10) into the
nozzle adaptor (11). Slide the ring back.
NOTE: Check that the spray nozzle is prop-
erly secured (See Fig. D).
— Attach the short lance to the machine.
NOTE: To attach, align the two tabs on the
lance with the recesses in the pressure
cleaner as shown (See Fig. C).
Assembly extension lance
7.2
— Attach the short lance with multi-spray
nozzle to the extension lance (7) (See
Fig. F).
— Attach the extension lance (7) to the
machine (See Fig. E).
NOTE: To attach, align the two tabs on the
lance with the recesses in the pressure
cleaner as shown (See Fig. C, E, F).
Attach the hose (8) to the machine.
7.3
— Connect quick connect coupling (17) to
hose adaptor (5) (See Fig. H1, H2).
NOTE: After attaching the hose, check the
connection by gently pulling on the hose.
You should not be able to pull the hose off.

8. Use

Select water source
8.1
WARNING: Do not use the machine with a
water source that is cloudy, muddy or
corrosive.
— Suitable water sources:
• Bucket / water bag
• Ditches / canals / lakes / sea (After use,
the system must be completely flushed
with fresh water).
NOTE: When using in open water (ditches /
canals / lakes etc.), make sure that the filter
remains far away from the bottom (move
the floater if necessary). Always use the
supplied hose with filter for the water
sources.
English
5