• The reduction of pressure starts by the solenoid valve opening
briefly. Once the pressure has been slightly reduced and pulse
recognised, the pressure reduction is synchronised with the
pulse of the person examined and the pressure is released
completely.
• If the Start button is pressed during the build-up of pressure,
the appliance is switched off and the air expelled from the cuff.
• When the measurement is completed, the pressure release
is taking place. The systolic pressure appears in the upper
display area, the diastolic pressure in the middle area, and
the pulse in the lower display area.
Symbol
(normal value)
Date
These measured values are displayed as long as the Start button
is pressed again.
They get lost if they are not saved.
After 3 minutes the values are automatically deleted and the
appliance changes to the "Time" display mode.
If you repeat the measurement, wait 5 minutes between measure-
ments.
48
Systolic value
Diastolic value
Pulse rate
per minute
Time