Metabo HPT DH 38YE2 Instructions De Sécurité Et Mode D'emploi page 8

English
HOW TO USE
NOTE:
Ensure that the wing bolt in the side handle is
properly tightened before using the tool.
1. How to drill holes (Fig. 4)
(1) Pull the switch trigger after applying the drill bit
tip to the drilling position.
(2) It is unnecessary to forcibly press the Rotary
Hammer main body. It is sufficient to slightly press
the rotary hammer to an extent that clips are freely
discharged.
Side handle
Fig. 4
CAUTION:
Although this machine is equipped with a safety
clutch, if the drill bit becomes bound in concrete
or other material, the resultant stoppage of the
drill bit could cause the machine body to turn in
reaction. Ensure that the main handle and side
handle are gripped firmly during operation.
2. How to chisel or demolish (Fig. 5)
By applying the tool tip to the chiseling or
demolishing position, operate the rotary hammer
by utilizing its empty weight. Forcible pressing or
thrusting is unnecessary.
Fig. 5
3. When drilling at "rotation + hammering"
CAUTION:
If you switch the selector lever during motor
rotation, the tool can start to rotate abruptly,
resulting in unexpected accidents. Be sure to
switch the selector lever when the motor is at a
complete stop.
8
01Eng_DH38YE2_US
(1) Switching to "rotation + hammering"
(a) Push the button, release lock and turn the
(b) Align L of the selector lever and
(c) Release the button to lock the selector lever.
NOTE:
Turn the selector lever (do not push the button) to
check if it is completely locked and make sure that
it does not turn.
4. When chipping and shredding at "hammering":
CAUTION:
If the selector lever is switched during motor
rotation, the tool can start to rotate abruptly,
resulting in unexpected accidents. Make sure to
switch the selector lever when the motor is at a
complete stop.
(1) Switching to "hammering"
(a) Push the button, release lock and turn the
(b) Align L of the selector lever and
(c) Release the button to lock the selector lever.
8
selector lever clockwise.
lever holder as illustrated in Fig. 6.
Lever holder
Button
Selector lever
Fig. 6
selector lever counterclockwise.
lever holder as illustrated in Fig. 7.
Lever holder
Selector lever
Button
Fig. 7
4/21/10, 4:26 PM
of the
of the