Kicker CompVR CVR10 Manuel D'utilisation page 3

SEALED ENCLOSURE APPLICATIONS
These sealed enclosure designs give the smoothest response with increased energy at the lowest
frequencies, 20Hz–30Hz. These designs deliver highly-accurate bass and can be driven with large levels
of amplifi er power. This maximum enclosure volume application is ideal for ultra sound quality installations.
The maximum enclosure generates a very fl at response curve and superbly extends the sub-bass
response.
CompVR woofers perform well in any size sealed enclosure between the minimum and maximum
volume recommendations. These systems will exhibit benefi ts of both designs: Minimum produces
high-impact bass, and maximum generates low bass frequency protraction. Overall, the system will
sound more like the recommended enclosure design it is closest to in enclosure volume. These
enclosure recommendations have been calculated with the airspace inside the enclosure and include the
displacement of the woofer. All sealed-enclosure airspace should be fi lled to 50% loose poly-fi l (polyester
fi berfi ll) stuffi ng. Do not make the airspace greater than the maximum enclosure volume recommendation.
Sealed Minimum
Model Volume ft
CVR10 .8 [22.7]
CVR12 1 [28.3]
CVR15 1.8 [51]
Panel Dimensions for Sealed Compact enclosures using 3/4" (1.9cm) thick MDF (See Figure 2)
Model Volume ft
CVR10 .8 [22.7]
CVR12 1 [28.32]
CVR15 1.8 [51]
3
[L] Power Handling
350W RMS
400W RMS
500W RMS
3
[L] Panel A in. [cm]
13.5X13.5 [34.3X34.3]
14.5X14.5 [36.8X36.8]
17.25X17.25 [43.8X43.8] 17.25X13.5 [43.8X34.3]
Figure 2
B
A
Sealed Maximum
Model Volume ft
CVR10 3 [85]
CVR12 4.6 [130]
CVR15 5.2 [147]
Panel B in. [cm]
13.5X10.125 [34.3X25.7] 12X10.125 [30.5X25.7]
14.5X11 [36.8X27.9]
C
3
[L] Power Handling
300W RMS
300W RMS
500W RMS
Panel C in. [cm]
13X11 [33X27.9]
15.75X13.5 [40X34.3]
3