Gas Tap Maintenance; Replacing The Oven Light Bulb - Whirlpool CP 87 SG1/HA S Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

• Clean the terminal part of the flame failure safety devices*

frequently.

• The inside of the oven should ideally be cleaned after

each use, while it is still lukewarm. Use hot water and

detergent, then rinse well and dry with a soft cloth. Do

not use abrasive products.

• Clean the glass part of the oven door using a sponge

and a non-abrasive cleaning product, then dry thoroughly

with a soft cloth. Do not use rough abrasive material or

sharp metal scrapers as these could scratch the surface

and cause the glass to crack.

• The accessories can be washed like everyday crockery,

and are even dishwasher safe.

• Only clean the appliance when the oven is cold.

• The steel parts and especially the areas with the screen-

printed symbols should not be cleaned with solvents or

abrasive detergents. It is advisable to use only a damp

cloth with lukewarm water and washing up liquid.

Stainless steel may remain stained if in long-term contact

with very calcareous water or aggressive detergents

(containing phosphorus).

It is therefore always necessary to rinse and dry all

surfaces thoroughly after cleaning.

! Never use steam cleaners or pressure cleaners on the

appliance.

Inspecting the oven seals

Check the door seals around the oven regularly. If the seals

are damaged, please contact your nearest Authorised After-

sales Service Centre. We recommend that the oven is not

used until the seals have been replaced.