Busch+Müller IQ-XSH Notice D'utilisation page 9

Height adjustments of the light
Adjust the bicycle light so that oncoming traffic is not blinded or startled. On a completely even road,
the horizontal light cut-off line must always be visible in the distance!
Fig.: Example of bicycle light position with dimmed beam
NOTICE
Ensure the headlight is connected to a DC voltage source with suitable voltages only, e.g. light
output or a range of other powerful connections of the e-bike. Connection to an AC voltage source (e.g.
dynamo) is not permitted! Due to the complex technology of e-bike systems, compatibility with every
16
Attention: Ensure blinded-free
alignment of the spotlight!
model cannot be guaranteed. Please consult your specialist dealer for advice. If your e-bike has a
dynamo to supply the lighting system, you need a standard dynamo headlight.
To connect to an e-bike battery, use the internally mounted double cable (black/white wire = plus,
black wire = minus) and shorten it as may be necessary. However, do not sever the handlebar
button cable!
6.2. Assembly of handlebar button with clamp
Attach the button securely and easily accessible to the handlebar using the enclosed clamp
so that it allows cyclists to activate it without having to take their hand off the handlebar. The
button can be mounted on handlebars with a diameter of 22 mm (± 0.2 mm).
Press the handlebar button 3 into the upper part of the fastening clamp
the cable through the groove in the clamp and place the button on the handlebar in a way to
allow the cable to exit downwards . (If the cable exit is at the top, moisture can enter the inside
6
of the button and cause damage). Attach the lower part of the clamp
to the upper part using the enclosed self-tapping screws.
Alternatively, the upper part of the mounting clamp
brake lever mountings to replace the upper part of the brake lever mounting clamp. This works
for selected Magura brakes. For some Tektro brake lever mountings, a compatible upper part of
the mounting clamp can be ordered from Busch + Müller. (Busch + Müller REF: 460HTGT-1)
4 from below, guide
from below and screw it
5
4 can also be screwed directly onto suitable
17