Télécharger Imprimer la page

Busch+Müller IQ-XSH Notice D'utilisation page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
1. Instruction Manual for headlights of the LUMOTEC IQ series with high beam light function for
bicycles with pedal assistance (e-bikes)
Not approved for vehicles that must carry licence plates (fast e-bikes)
IQ-XSH DC voltage source 9 to 48V
Requirements for high beam mode 11 W min. nominal power at the light connection of the drive system.
IQ-XM DC voltage source 9 to 48V
Requirements for high beam mode 16 W min. nominal power at the light connection of the drive system.
IQ-XL DC voltage source 11 to 48V
Requirements for high beam mode 16 W min. nominal power at the light connection of the drive system.
This Instruction Manual is intended for users with knowledge and experience in assembling and installing
bicycle components. You need to have the suitable tools. If you do not know how to assemble or install
bicycle components or do not have all the necessary tools for the job, you must consult with a bicycle
specialist to have the installation done properly. Otherwise, the bicycle rider may fall off and be seriously
injured due to improper assembly or installation of the light. Read this Instruction Manual, follow all the
steps described and keep it in a safe place.
12
2. Safety information
This Instruction Manual uses the following signal words to alert you to potential hazards. The
meaning of the signal words is listed below.
WARNING
Indicates a hazardous situation that, if not avoided, could result in death or
serious injury.
NOTICE
Indicates information considered important, but not hazard-related (e.g. information
related to property damage).
The
symbol is used to provide other useful information about your new bicycle lights.
3. Intended use
Busch + Müller offer a range of different types of bicycle lights. Not every bicycle light can be used
for every application and for riding bicycles on every surface. There are limitations. If you are not
sure what type of bicycle light you have, either call our service hotline at +49 2354/9157111, send
an e-mail to service@bumm.de or consult a local specialist bicycle retailer.
NOTICE
Bicycle lights made by Busch + Müller are suitable for use on bicycles that are ridden on
a firm surface. Riding on uneven ground such as country tracks can cause severe damage to the
bicycle light due to vibrations and shocks. Avoid any extreme use, and never ride down stairs or
perform jumps, stunts, tricks, bunny hops or vertical descents on rough terrain.
13

Publicité

loading

Ce manuel est également adapté pour:

Iq-xmIq-xl