Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
3.0 Maintenance
3.1 Mounting the additional weight Fig. A
Always lock the additional weight with the screw nuts. (10)
Use only the genuine Wolff weight. Do not use any other
weights! This may overstress the machine
3.2 Mounting suction ring Fig. B
► Lay the machine down on rubber buffer
► Insert safetyring
► Mount at once a disc to fix the suction ring
3.3 Assembly of the grinding discs Fig. B
Lay the machine down on the handle. Thus the support
of the discs is accessible. Put the mounting disc on the
actuation and lock it by turning anti-clockwise. The brushes
are placed in the same way in the middle. By turning coun-
terclockwise they are fixed.
3.4 Mounting cleaning tank Fig. E
Assemble the cleaning tank with 2 supports to the handle.
insert cleaning tank into the lower support
► Insert cleaning tank down into the holder
► turn cleaning tank at the top against the handle and
engage the both fixing pins.
Assembly is made easier by folding the handle backwards.
Connect the chain (1) on top of the tank with lever (2).
Connect the tube (3) of the tank with the opening on the
left side of the machine. By pulling lever (2), detergent
liquid pours onto the cleaning discs or brushes.
3.5 Suspension adjustment Fig. D
If the transportation wheels are lowered to the floor, the
machine is stabilised and easier to control.
► Lifting and lowering of the handle is no more
necessary.
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 7062-91556-0 | Fax: +49 7062-91556-41 | www.wolff-tools.de
20
► The machine has to be in a levelled position.
The wheels have to be fixed accordingly.
By loosening the release handle (5), the wheels can be put
in upper and lowered position.
3.6 Applications
Screeds + levelling compounds
Cleaning and brushing
Paper grinding disc grade 24,corrugated steel-brush disc,
diamond segment red
Removing light dirt and flooring residuesl
like paint, mortar, felt or foam
Carbide grinding disc grade 16
cylindrical brush disc, flat steel brush disc
Removing tough dirt and flooring residues like
adhesive, felt or foam
Carbide grinding disc grade 16, System carbide milling
disc, milling disc with star wheel segments, Rotating
milling disc, Diamond segment, green
Removing tough and tenacious adhesive
(bituminous) residues
PKD-Diamond milling disc, Rotating milling disc
Removing Epoxy- and PU-laquer
PKD-Diamond milling disc, Rotating milling disc
PKD-Split segment disc, Diamond segment, silver
Removing Epoxy-coatings
PKD-Diamond milling disc, Rotating milling disc
PKD-Split segment disc
Removing PU-coatings
PKD-Diamond milling disc, Rotating milling disc
PKD-Split segment disc, Diamond segment, red
Removing the loose sintered material on new
anhydrite- and magnesia screed
Carbide grinding disc grade 16, paper grinding disc grade
16 cylindrical brush disc, flat steel brush disc PKD-Split
segment disc, Diamond segment silver
Finish grinding and levelling
Paper grinding disc grade 40-60,
grinding gauze grade 80-120
Publicité
Table des Matières
