EN
1.0 Product description
Important components of the machine
The numbering of the product features refers to the
illustration of the machine on the graphics page 2-3.
A
1 Handgrip
2 Motor
3 Clamping Carriage
4 Gear lever
5 Carriage
6 Additional weight
7 Suction ring
8 Selector
9 Suction socket
10 Screws additional weight
11 Speed control knob
Functional description
Please refer to the graphics on pages 2-3 while
you read the operating instructions.
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 7062-91556-0 | Fax: +49 7062-91556-41 | www.wolff-tools.de
16
Restriction of use
The MAMBO EVO grinding machine is only designed for
removing putty mass and adhesive residue from screed or
concrete.
When the machine is used in another way, it shall be regar-
ded as unfit for the purpose. Uzin Utz AG shall not accept
any liability for damage resulting from nonintended use.
Declaration of Conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: DIN EN 1037, EN ISO 12100, DIN EN 62841-1,
DIN EN 55014-1, DIN EN 55014-2 according to the provisi-
ons of the: 2006/42/EC, 2014/30/EU, 2014/35/EU.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
01.04.2017
i.v.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply ........................................ 230 V 50 Hz / 115 V 50-60 Hz
Power consumption ....................... 2000 W (230 V) / 1500 W (115 V)
No-load speed.................................................................100 - 400 rpm
Weight ...............................................52 kg + 18 kg additional weight
Diameter of discs........................................................... 375 - 400 mm
Includes:
1 Grinding machine MAMBO EVO
1 Protection-/Suction ring
1 Additional weight
1 Ear protection
1 Manual