Signs And Symbols; Important; Notes; Safety Notes - Beurer TL 50 Mode D'emploi

Lampe de luminothérapie
Masquer les pouces Voir aussi pour TL 50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17

2. Signs and symbols

The following symbols appear in these instructions or on the device.
Read the instructions of use
Warning instruction indicating a risk of
injury or damage to health.
Warning
Safety note indicating possible damage
to the unit/accessory.

Important

Serial number
The CE labelling certifies that the product
complies with the essential requirements
of Directive 93/42/EEC on medical pro-
ducts.
Disposal in accordance with EC Directive
(Waste Electrical and Electronic Equip-
ment).
Permissible storage temperature and
Storage
humidity
Dispose of packaging in an environmen-
tally friendly manner
21
PAP

3. Notes

Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to
other users and observe the information they contain.

Safety notes

Warning
• The light of the daylight therapy lamp is only intended for use on the human body.
• Before use, ensure that all packaging materials are removed and that there is no visible damage to the unit
or accessories. When in doubt, do not use the unit and contact your dealer or the customer service ad-
dress provided.
• Also ensure that the daylight therapy lamp has a firm footing.
• Connect the unit only to the mains voltage listed on the type plate.
• Do not dip the unit into water and do not use it in wet rooms.
• Do not use it in the vicinity of people who are helpless, children under age 6 or people who are insensitive to
heat (people with skin lesions due to illness); do not use after taking painkillers or drugs or drinking alcohol.
• Keep children away from packaging materials (risk of suffocation).
• Do not cover up or pack away the unit while it is warm.
• Always unplug the mains part and allow the device to cool down before touching it.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
• Ensure that you only insert and remove the mains part with dry hands and that you only press the ON/OFF
button with dry hands.
• Keep the mains cable away from hot objects and naked flames.
• Danger of strangulation due to excessively long cables.
• Protect the unit from strong impacts.
Permissible operating temperature
Operating
and humidity
Direct current
Note on important information
Note
Manufacturer
Device in protection class 2
OFF / ON
IP21
Protected against solid foreign objects
12.5 mm in diameter and larger, and
against vertically falling drops of water
11

Publicité

Table des Matières
loading

Table des Matières