Cleaning And Descaling; Cleaning The Device - Bartscher 200.061 Mode D'emploi

6.2 Cleaning and descaling

Cleaning the device

o Clean the device after each use.
o Clean external surfaces with a wet and soft cloth with mild detergent.
o Clean the interior of water tank with a mild detergent and rinse with clean water.
o Next, clean the emptying tap by letting water through.
o Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o Before storing the device in a dry place you should make sure it has been cleaned
properly.
Descaling
o Inappropriate water quality may cause building up of scale. Build up of scale extends
heating time and can lead to damage of the device.
CAUTION!
No claim shall be approved in case scale has not been regularly removed, in line
with the description included in the device manual.
Our guarantee does not cover this type of claim!
Please, do remove scale from the device!
o Fill the water tank with clean water, add vinegar or a suitable agent and boil the
solution.
o Open emptying tap to let some of the solution pass through, to remove the scale
inside.
o Boil the remaining solution 1 or 2 times more.
o Cool the device down.
o Remove the solution and rinse the tank several times.
NOTE!
Use filtered water to avoid scale build up!
- 23 -