Floor Nozzle; Dust Container With Filter Unit - Royalty Line HVC-150.55R Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Floor Nozzle

1. Disconnect the floor nozzle from the suction pipe.
2. Turn the floor nozzle around, so that you see the lower side.
Press the button (12) on the floor nozzle to unlock the lock
of the brush roller on the left side.
3. Pull out the brush roller.
4. Remove threads and hair wound to the brush. Use
scissors, if required.
5. Assembly:
Refer to the adjacent figure.
5.1 Set the brush roller at position (1).
Make sure that the triangular recess on
the brush roller is positioned correctly.
5.2 Return the bearing of the brush roller
into the housing of the floor nozzle
(position 2).
6. Close the lock of the brush roller. It must audibly engage.

Dust Container with Filter Unit

Please read the chapter "Maintenance" for cleaning of these
components.
Storage
● Clean the appliance as described and allow it to dry.
● You can use the previously installed wall holder for storage.
● We recommend that you keep the appliance in the original
packaging if it will not be used for long periods.
NOTE concerning the life of the rechargeable
battery:
Even when switched off, the rechargeable battery discharges
continuously. When the device is out of use for
a longer period of time, charge the rechargeable battery
at least once every 6 to 12 weeks.

Publicité

Table des Matières
loading

Produits Connexes pour Royalty Line HVC-150.55R

Table des Matières