System Settings - Pioneer MVH-X380BT Mode D'emploi

Menu Item
SLA
[+4] to [–4]
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings
(page 7).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings
(page 7).
*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.
Menu Item
LANGUAGE
[ENG](English), [РУС]
(Russian), [TUR](Turkish)
CLOCK SET
12H/24H
[12H], [24H]
AUTO PI
[ON], [OFF]
AUX
[ON], [OFF]
18
En
Description
Adjust the volume level for each source
except FM.
Each of the below combinations are set to
the same setting automatically.
• USB, iPod, ANDROID, and APP (iPhone)
• BT AUDIO, ANDROID, and APP (Android)
Description
Select the language to display the text
information from a compressed audio file.
Set the clock (page 6).
Select the time notation.
Search for a different station with the same
programming, even if using a preset
station.
Set to [ON] when using an auxiliary device
connected to the unit.
Menu Item
USB AUTO
[ON], [OFF]
BT AUDIO
[ON], [OFF]
MUTE MODE (Only for MVH-180UI)
[MUTE], [20dB ATT], [10dB
ATT]
PW SAVE*
[ON], [OFF]
BT MEM CLEAR
[YES], [CANCEL]
BT VERSION
APP CONN.SET
[WIRED], [BLUETOOTH]
ANDROID WIRED
[MEMORY], [APP CONTROL]
Description
Select [ON] to automatically switch to
[USB] source when a USB device/iPod is
connected to the unit.
Select [OFF] when a USB device/iPod is
being connected to the unit just for
charging.
Set the Bluetooth signal on/off.
Mute or attenuate sound automatically
when a signal from equipment with a mute
function is received.
Reduce the battery power consumption.
Turning on the source is the only operation
allowed when this function is on.
Clear the Bluetooth device data (device list,
PIN code, call history, phone book, preset
phone numbers) stored in the unit.
[CLEARED] appears when data is
successfully deleted.
Displays the system version of the unit and
the Bluetooth module.
Select the appropriate connection method
according to your device.
Select the appropriate connection method
for an Android device.