Assembly; Operation - Ryobi P3100 Manuel D'utilisation

UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create accesso-
ries or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
INSTALLING PEN HOLDER
See Figures 1 - 2, page 9.
 Insert the pen holder into the hole on the base as shown.
 Rotate and press the pen holder under the tab until it
locks into place.

OPERATION

WARNING:
Do not hold the soldering iron pen with your fingers near
any metal part of the tool. The tip of the tool reaches
working temperature within seconds. Always assume
that the soldering tip is hot. Touching a hot soldering tip
can result in serious personal injury.
WARNING:
Do not use or store the soldering iron near flammable or
combustible materials or liquids. These materials may
ignite when exposed to the high temperatures created
by the tip.
APPLICATIONS
You may use this product for the purposes listed below:
 Soldering circuits and electrical connections
 Soldering of jewelry, stained glass, and other crafts
WARNING:
Battery tools are always in operating condition. Place
the switch in the off position and remove the battery
pack when the product is not in use or when carrying
at your side.
6 — English