Installing The Refrigerator - GE 23 Série Manuel D'utilisation Et D'installation

INSTALLING THE REFRIGERATOR

REFRIGERATOR LOCATION
• Do not install the refrigerator where the
temperature will go below 60°F (16°C)
because it will not run often enough to
maintain proper temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37°C)
because it will not perform properly.
• Install it on a floor strong enough to
support it fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and
plumbing and electrical connections:
23'/25' CustomStyle
Sides 1/8" (4 mm)
Top 1" (25 mm)
Back 1/2" (13 mm)
DIMENSIONS AND SPECIFICATIONS
3/4" (19 mm) Airspace
(1/2" [13 mm] Gap +
1/4" [6 mm] Wall Plates)
24" (61 cm)
Cabinet
Installation Instructions
23' (33" wide),
™ 25', 26', 27', 29'
1/8" (4 mm)
1" (25 mm)
1" (25 mm)
Water Electrical
25" (63.5 cm)
Countertop
DIMENSIONS AND SPECIFICATIONS
(for 23' CustomStyle
DIMENSIONS AND SPECIFICATIONS
(for 25' CustomStyle
" (183.5 cm) required for full adjustment
*72 1 /
4
of mobility wheels. If cabinets installed
above refrigerator have doors that are
flush to the top of the opening for the
refrigerator, then an additional 1/8" may be
required to provide clearance for cabinet
doors to open freely.
26
™ models)
" (178.4 cm)
70 1 ⁄
4
36"
(91.4 cm)
24" (61 cm)
™ models)
" (183.5 cm)*
72 1 ⁄
4
36"
(91.4 cm)
24" (61 cm)