GOAL ZERO Sherpa 100AC Mode D'emploi page 15

TROUBLESHOOTING
Overheating
• The Sherpa is too hot and needs to cool down before it can be used
again.
• To avoid this shutdown, monitor the Main Page for the temperature
warning icon.
• When using the AC port, do not block the fan on the back of
the Sherpa.
• When charging, allow the Sherpa to have proper ventilation.
Resetting the Sherpa
• Press and hold
• Continue holding
• NOTE: this resets the Sherpa, watt-hour counter, and restores
default settings on all ports.
for 3 seconds to initiate reset.
for 8 seconds until the main page is shown.
13