Alcad ACO-000 Instructions D'installation page 17

PC INTERFACE
Important:
Ensure that the place chosen for the PC interface can be reached easily by the cables of the microphone or the headphones with
microphone that you intend to use.
In any case, do not choose a location that is more than 1.5 metres (the length of the cables provided with the PC interface) from the
PC.
The PC interface can be fixed to the wall using the wall-plugs
and screws provided.
It is recommended that a minimum distance of 80mm be
observed between the positioning of the screw and of the exit
point of the cables of the video door entry system.
To fix the interface using the two screws provided, position
the screws 38mm apart.
Do not insert the screws completely, but leave their heads
projecting a few millimetres out of the wall.
Fit the heads of the screws into the two openings on the back
of the interface (1). Move the interface sideways in such a
way that it is held in place by the screws (2).
VIDEODOOR ENTRY SYSTEMS
Front view
Vue de devant
Rear view
Vue arrière