tibelec 976430 Notice D'utilisation page 13

1. Set the function selector switch to position
2. Connect the test plungers to the circuit and read the value
displayed on screen once it has stabilised.
1. Set the function selector switch to position
2. Connect the test plungers to the circuit and read the value
displayed on screen once it has stabilised.
1. Set the function selector switch to position
FUNC button to display the symbol on screen
2. Connect the test plungers to the circuit and read the value
displayed on screen once it has stabilised.
1. Set the function selector switch to position
FUNC button to display the symbol on screen
2. Connect the test plungers to the circuit and read the value
displayed on screen once it has stabilised.
1. Set the function selector switch to position
2. Connect the test plungers to the circuit and read the value
displayed on screen once it has stabilised.
V
~
V
mA ~
and press the
~
AC
~
mA
and press the
DC
Ω
13