Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Operation
Turn on the oacuum cleaner by pushing the ON/OFF switch to position " l ". The indicator light illuminate
green during use. (When the battery is low, the indicator light will blink in green.)
For vacuuming out seams and gaps, the crevice tool can be used. For cleaning off stubborn dust, insert the
brush attachment into the suction nozzle and then attach the brush for use.
The appliance can suck up small quantity of liquids (< 40℃), and in this situation, please use the rubber
tool.
After use, switch off the oacuum cleaner by pushing the ON/OFF switch to position " O ".
Caution: When operating the device, never hold the vacuum cleaner by making the suction nozzle face upwards
in case liquids and minor dust enter into the motor unit.
Empty the container and clean the filter when:
The suction power decreases.
Crumb comes out from the suction nozzle.
Each time after use.
Placing the device in its charging base.
CLEANING AND MAINTENANCE
1.
Press the container opening button to separate the dust container from the motor unit.
2.
Gently pull the filter assembly out of the dust container.
3.
Empty the dust container.
The dust container and filter assembly can be shaken clean or rinsed by warm water (< 40 ℃). Make sure
4.
the parts are completely dry before they are re-installed.
5.
Do not immerse the motor unit in water or any other liquids. Use only a soft moist cloth to clean the outside
of the unit. Do not allow any kind of liquid to enter the unit.
Notes:
All the parts of the vacuum cleaner are NOT dishwasher safe.
Do not use aggressive chemicals or abrasives.
Do not use the device if the filter is broken or worn out.
The unit does not contain parts serviceable by you, do not disassemble it and do not try to repair it yourself.
- 13 -
Publicité
Table des Matières
