Date And Time Setting; Datalogger Setup - Velleman DEM105 Mode D'emploi

9.3 Date and Time Setting

1. Left-click on the date and time setting icon to open the interface.
2. Set the desired date and time, and press [OK] to confirm.
Remarks:
 (Re)setting date and time will delete all saved data. It is advised to
previously back up data.

9.4 Datalogger Setup

1. Left-click on the datalogger setup icon to open the interface.
2. Set all parameters as desired and press [OK] to confirm.
V. 01 – 11/05/2015
DEM105
7 ©Velleman nv