Velleman DEM105 Mode D'emploi page 4

4. Features
 memory for 32700 readings
 LCD to show logging information easily
 free selectable measurement cycle from 1 sec to 24 hours
 long battery life: more than 2 years (under ideal conditions at 22° C)
 display all alarm and record statuses with 2 LEDs
 alarm will output a high pulse per 10 milliseconds if it exceeds the set
high/low alarm value
 analysis software used to view graphically or text mode for logging data
 USB computer interface (advanced software programme for all
windows)
 comes with protective cover, mounting clip, USB cable, English software
for Windows
5. Overview
Refer to the illustrations on page 2 of this manual.
1 recording LED
2 alarm LED
3 LCD display
4 MIN/MAX button
Display
1 battery level
2 MIN/MAX
3 recording
4 current reading
5 time/date
6 full memory
6. Battery
1. To replace the battery, make sure the device is switched off.
2. Open the battery compartment at the back using an appropriate
screwdriver.
3. Take out the old battery and replace with a new and identical 3.6 V
battery following the polarity markings inside the compartment.
4. Close the battery compartment.
Warning: Do not puncture batteries or throw them in fire as they
may explode. Do not attempt to recharge non-rechargeable
batteries (alkaline). Dispose of batteries in accordance with local
regulations. Keep batteries away from children.
V. 01 – 11/05/2015
® XP, Vista, 7, 8.1 (32 and 64 bit), manual, battery
DEM105
5 sensor
6 °C/°F button
7 USB socket
8 alarm output socket
7 single recording mode
8 loop recording mode
9 time/date reading
10 % RH
11 °C/°F
4 ©Velleman nv