Device Functions; Before Fi Rst Use - DS Produkte 01175 Mode D'emploi

Settings
A

Device functions

• The device has an electronic temperature control for reliably setting the selected
temperature and maintaining it when the device is connected to the mains supply.
• In the event of overheating, the device will switch off.
• The anti-drip system switches off steam production to prevent water from dripping
out of the soleplate at a low temperature. NOTICE: The anti-drip system may emit a
clicking noise while heating up or cooling off. This is normal and does not represent
a defect.
• The stainless steel soleplate allows the device to effortlessly glide over the fabric.
Before fi rst use
ATTENTION!
■ The plastic foils and bags pose a suffocation hazard! Children and animals must be
kept away from the packaging material.
■ Any water residue in the water tank is attributed to previous testing of this device and
does not constitute a fault.
• Unpack the product contents and make sure they are complete (see chapter "Product
contents and device overview") and check for any damages from transport. If the
21
0 (off)
Nylon / • (low temperature / steam emission not
possible)
Synthetic / •• (medium temperature / steam emis-
sion not possible)
Wolle (wool)
Baumwolle (cotton) / ••• (high temperature) /
(steam emission possible)
Leinen (linen)
MAX (maximum temperature)
B C
A On/off switch for the heat function of the
water tank (steam production)
B Control light for the heat function of the
water tank
C On/Off switch for the heat function of the
soleplate
EN