Storage; Troubleshooting - Gorenje GT-E808-08-01 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

Storage

For practical storage purposes, the combi fl oor nozzle or the hard fl oor nozzle can be
hooked into the holder (12) on the back of the device and the telescopic tube (3) can
be collapsed as far as possible.
Store the device in a dry, clean place that is protected from sunlight and is not
accessible to children and animals.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device
generates no
suction.
The performance is
weak.
The suction noz-
zles do not stick
on the telescopic
tube (3).
Dust escapes from
the device during
cleaning.
26
The crevice and brush nozzle can be stored in the device.
For this purpose, the dust container must be removed
from the device (see picture).
Possible cause / solution / tips
Is the plug not inserted in the mains socket correctly? Correct
the fi t of the mains plug.
Is the plug socket defective? Try another plug socket.
Check the fuse of the mains connection.
Are the fi lters clogged? Clean all fi lters.
Is the exhaust air valve (2) in the handle open? Close the
exhaust air valve (2).
Is the dust container (7) too full? Empty the dust container (7).
Are the fi lters heavily clogged? Clean all fi lters.
Is the suction nozzle, the telescopic tube (3) or the suction
hose (9) clogged? Switch off the device, pull the mains plug
out of the plug socket and remove the cause of the blockage
(also see the "Assembly" chapter).
Has the big turbo nozzle just been used? When the big
turbo nozzle is removed, the adapter sleeve may remain
stuck on the telescopic tube (3). Please note that the other
suction nozzles can only be fi tted on the telescopic tube (3)
if the adapter sleeve has been removed from the telescopic
tube (3)!
Is the dust container (7) not closed correctly and / or not
(correctly) inserted into the device? Correct the fi t of the dust
container (7).

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

06289

Table des Matières